Troubleshooting · Checked 2026-09-13
Change a wall angle or move a connected corner
Use the round endpoint handles in 2D, or enter a measured angle and length.
Why this can happen
Moving a wall body translates it. Moving an endpoint changes its angle and length while the connected corner stays joined.
What to do
- Switch to Select in 2D and select the wall. On touch screens, tap it once without opening Selected.
- Drag a round endpoint handle. The opposite end stays fixed and adjoining wall ends follow the corner. Drag the wall body instead to move the whole wall.
- Direction snapping gently assists common angles. With a keyboard, hold Shift for 45-degree steps or Ctrl/Command to release angle assistance.
- For an exact value, open Selected → Position & size and enter Angle or Length. These keep the start point fixed and move the connected end. Advanced provides Start and End coordinates.
- Check the adjoining rooms, openings and roof in both views. Undo reverses a complete drag; Escape cancels a mouse drag. Unlock adjoining walls before moving a shared corner.
Check before you continue
The editor rejects edits that collapse walls or break room boundaries. Angle and Length describe the straight chord between endpoints; curved wall length is also shown separately. Changing a corner can alter neighbouring room dimensions, so verify the surveyed layout.
Related demonstrations
These show the relevant tools; they may not reproduce your exact problem.
Was this helpful?
Your feedback helps us improve these instructions.